INTRODUCTION
STEP ONE: PREP

GETTING STARTED
STEP TWO: CLEANING

PREWET & MIX
APPLY CLEANER
RINSE
DRYING
WEATHER CONDITIONS
STEP THREE:
DEFY APPLICATION

PREP FOR APPLICATION
METHODS OF APPLICATION
DEFY WOOD FINISH APPLICATION - VERTICAL
HORIZONTAL APPLICATION
DRYING/CLEAN-UP
MAINTENANCE COATS

DEFY Wood Finish
TimberWash Cleaner
TimberBrite Brightener

Guidelines for Optimum Performance
Article: Importance of Maintenance Coats
Deck Stain Removal Guide
DEFY Limited Warranty
 
INTRODUCTION: Why use DEFY and TimberWash?
Exterior wood, especially decks, is exposed to harsh weathering that can destroy its natural strength and beauty. DEFY is a high performance water-based water repellent that protects wood from the damaging effects of UV sunlight and water, yet is also safe for the environment. DEFY is formulated with unique synthetic resins that are naturally resistant to biological growth. Most wood finishes are made from oils and resins which actually support mold and mildew growth. Wood surfaces absorb more water and deteriorate as micro-organisms break down the oils and resins.

With DEFY, wood stays looking new longer and is easier to maintain. A light maintenance coat every 12 to 18 months on horizontal surfaces, and every 3 to 5 years on vertical surfaces, is all it takes to preserve the beauty of your deck.
Over 80% of decks are constructed with pressure treated wood, usually pine, that has been injected with chromated copper arsenate (CCA), a chemical that protects wood from rot and insects. But pressure treating wood does not give it weather protection. In fact, according to the manufacturers of CCA lumber, it actually makes wood more porous and susceptible to water damage. And without proper care, treated lumber can deteriorate from the elements. Sunlight rapidly grays unprotected wood, and moisture promotes decay, as well as mold and mildew growth.
 
TimberWash:
Use TimberWash wood cleaner to safely remove dirt, grime, mildew, weathered graying, and previous failed treatments (not paint) before applying DEFY wood finish. TimberWash is a powdered concentrate that is mixed with water to restore the natural look of wood. Note: TimberWash will darken redwood. Use TimberBrite wood brightener to clean and brighten redwood or to further brighten other species that have been cleaned with TimberWash.

Unlike chlorine bleach based cleaners, TimberWash is more biodegradeble and will not harm wood fibers, pets, most plants or grass. It even safely removes organic stains on vinyl and aluminum siding, brick or concrete patios, and asphalt shingle roofs. TimberWash should also be used on new wood decking to remove mill glaze and open wood pores. TimberWash allows DEFY to penetrate up to 25% deeper, providing long-term water repellent protection.
 
TimberBrite:
TimberBrite is a liquid concentrate that is mixed with water to brighten and restore the natural beauty of all species of exterior wood. Product removes tannin and rust stains and is recommended for use on redwood. TimberBrite will not harm wood fibers, grass or most plants when used properly.
NEXT

PRODUCTS
HOW TO BUY
CONTACT US
ABOUT SAVERSYSTEMS
Copyright 1998 - 2001
Questions? Comments? E-mail us at comments@saversystems.com
About SaverSystems Contact Us How to buy Products from SaverSystems