INTRODUCTION
STEP ONE: PREP
GETTING STARTED
STEP TWO: CLEANING
PREWET & MIX
APPLY CLEANER
RINSE
DRYING
WEATHER CONDITIONS
STEP THREE:
DEFY APPLICATION
PREP FOR APPLICATION
METHODS OF APPLICATION
DEFY WOOD FINISH APPLICATION - VERTICAL
HORIZONTAL APPLICATION
DRYING/CLEAN-UP
MAINTENANCE COATS
DEFY Wood Finish
TimberWash Cleaner
TimberBrite Brightener
Guidelines for Optimum Performance
Article: Importance of Maintenance Coats
Deck Stain Removal Guide
DEFY Limited Warranty
DEFY Application: Horizontal
Treat horizontal surfaces last. Saturate wood with two wet-on-wet coats for maximum protection. Apply first coat and brush or backroll product into surface working out all drips, puddles, or areas of overspray before product dries. Use the same method to apply a second coat within 5-10 minutes, or as soon as possible. Do not allow drying between coats. To avoid lap marks, do not stop in the middle of boards or sections.
Note: Complete entire sections or to a natural break before allowing to dry. Since the end grain of wood is more absorbent, it is important to thoroughly coat the ends of boards or logs to prevent water penetration.
Next
PRODUCTS
HOW TO BUY
CONTACT US
ABOUT SAVERSYSTEMS
Copyright 1998 - 2001
Questions? Comments? E-mail us at comments@saversystems.com
About SaverSystems Contact Us How to buy Products from SaverSystems