INTRODUCTION
STEP ONE: PREP
GETTING STARTED
STEP TWO: CLEANING
PREWET & MIX
APPLY CLEANER
RINSE
DRYING
WEATHER CONDITIONS
STEP THREE:
DEFY APPLICATION
PREP FOR APPLICATION
METHODS OF APPLICATION
DEFY WOOD FINISH APPLICATION - VERTICAL
HORIZONTAL APPLICATION
DRYING/CLEAN-UP
MAINTENANCE COATS
DEFY Wood Finish
TimberWash Cleaner
TimberBrite Brightener
Guidelines for Optimum Performance
Article: Importance of Maintenance Coats
Deck Stain Removal Guide
DEFY Limited Warranty
STEP ELEVEN: Drying/Clean-up
Dry Time: To touch; 2 to 6 hours depending on temperature and humidity. Allow 24 hours for decks to dry before using.
Clean-up: Clean tools and equipment immediately after use with soap and water. Remove overspray or spillage immediately with soap and water.

Note: Because DEFY forms a long-lasting bond with all surfaces, it is important to remove overspray from non-targeted areas immediately with soap and water. Overspray that is allowed to dry may be difficult or impossible to remove. If allowed to dry, product cannot be removed from concrete and masonry.
Next
PRODUCTS
HOW TO BUY
CONTACT US
ABOUT SAVERSYSTEMS
Copyright 1998 - 2001
Questions? Comments? E-mail us at comments@saversystems.com
About SaverSystems Contact Us How to buy Products from SaverSystems