TimberBrite can be used on all species of wood, but is recommended to brighten redwood and certain types of cedar. If necessary, a solution of liquid soap and water may be used first to clean wood. Then after rinsing thoroughly, apply TimberBrite to remove additional dirt, grime, rust and tannin stains. Dilute 1 part TimberBrite to 4 parts water in a plastic container and mix. Apply to wet surface, working on small areas at a time. Let solution stand for 15 minutes keeping area wet with additional solution if necessary. Dilution rate may vary depending on severity of stains. Be sure to thoroughly rinse with water. Brightens between 100-200 sq. feet per gallon when mixed at a 1 to 4 ratio as above. (See data sheet for further instructions).
Note: TimberWash and TimberBrite will NOT remove paint.
| Next |  |
Copyright
1998 - 2001
Questions? Comments? E-mail us at comments@saversystems.com
Questions? Comments? E-mail us at comments@saversystems.com
