INTRODUCTION
STEP ONE: PREP
GETTING STARTED
STEP TWO: CLEANING
PREWET & MIX
APPLY CLEANER
RINSE
DRYING
WEATHER CONDITIONS
STEP THREE:
DEFY APPLICATION
PREP FOR APPLICATION
METHODS OF APPLICATION
DEFY WOOD FINISH APPLICATION - VERTICAL
HORIZONTAL APPLICATION
DRYING/CLEAN-UP
MAINTENANCE COATS
DEFY Wood Finish
TimberWash Cleaner
TimberBrite Brightener
Guidelines for Optimum Performance
Article: Importance of Maintenance Coats
Deck Stain Removal Guide
DEFY Limited Warranty
 
Apply Cleaner:
Apply TimberWash cleaner with brush, mop or sprayer, working on small areas at a time. Allow solution to remain on the surface about 20 minutes before removing. Keep surface wet with additional solution.

Thoroughly scrub with a stiff, short bristle broom or brush working from bottom to top. TimberWash will open wood pores and some raising of wood fibers may occur.

 

Next
 
PRODUCTS
HOW TO BUY
CONTACT US
ABOUT SAVERSYSTEMS
Copyright 1998 - 2001
Questions? Comments? E-mail us at comments@saversystems.com
About SaverSystems Contact Us How to buy Products from SaverSystems