INTRODUCTION
STEP ONE: PREP
GETTING STARTED
STEP TWO: CLEANING
PREWET & MIX
APPLY CLEANER
RINSE
DRYING
WEATHER CONDITIONS
STEP THREE:
DEFY APPLICATION
PREP FOR APPLICATION
METHODS OF APPLICATION
DEFY WOOD FINISH APPLICATION - VERTICAL
HORIZONTAL APPLICATION
DRYING/CLEAN-UP
MAINTENANCE COATS
DEFY Wood Finish
TimberWash Cleaner
TimberBrite Brightener
Guidelines for Optimum Performance
Article: Importance of Maintenance Coats
Deck Stain Removal Guide
DEFY Limited Warranty

Weather Conditions:

Surface and air temperatures should be between 45 degrees and 95 degrees F. Avoid application in direct sunlight. Apply product to southern exposed areas during coolest part of the day. Do not apply when rainfall is expected within 12 hours unless protected with a polyethylene film, or its equivalent.
Check wood porosity. Sprinkle a few drops of water on wood to be treated. If the water penetrates within 1 - 2 seconds the wood is ready to be treated. If not, allow wood to dry longer and retest.
Next
 
 
PRODUCTS
HOW TO BUY
CONTACT US
ABOUT SAVERSYSTEMS
Copyright 1998 - 2001
Questions? Comments? E-mail us at comments@saversystems.com
About SaverSystems Contact Us How to buy Products from SaverSystems