DEFY Extreme Wood Stain is a synthetic-resin, semi-transparent wood stain formulated using state-of-the-art nano-technology to create a level of durability that has simply not been available in a wood stain finish in the past. Extreme Wood Stain is the newest member of the DEFY line of wood products and is our most innovative, high-performance product yet.

 

 

DEFY Composite Deck Sealer is an extremely durable clear finish that helps to prevent the return of black stains on composite decks as well as protect against the damaging effects of water, fungi, and UV radiation on composite wood surfaces. This V.O.C. compliant, water-based product is fortified with zinc nano-particles  a natural deterrent to recurring black algae stains. There are over 30 TRILLION of these zinc nano-particles per square inch that protect your composite wood by blocking out the sun's harmful UV rays to protect your composite deck from color fade, moisture, and fungal growth.

DEFY Composite Deck Cleaner is a safe, highly effective, oxygen bleach deck cleaner that removes black stains caused by algae, dirt, grime, and weathered graying from composite wood surfaces. Unlike chlorine bleach, this environmentally friendly deck cleaner is biodegradable and will not harm composite wood fibers, pets, grass or most plants.

DEFY Deck Stain for Hardwoods is formulated with smaller resins that penetrate hardwoods or oily softwoods better. If you're looking for the best stain for cedar decks in a water-based product, then look no further. DEFY Deck Stain for Hardwoods is a synthetic, semi-transparent deck sealer specifically formulated for use on cedar, mahogany, redwood, and other dense or difficult-to-penetrate woods.

DEFY Epoxy Fortified wood stain is a high-performance, semi-transparent, penetrating finish that helps to prevent the destructive effects of water, fungi, and UV radiation on exterior wood.

DEFY® Original Synthetic Water Repellent Wood Stain is a unique water-based system that protects wood without damaging the environment. Most wood finishes are formulated with natural oils, such as linseed or soya, that serve as a food source for mold and mildew. But the synthetic resins in DEFY® give it superior mold and mildew resistance without using excessive fungicides.

DEFY Interior Clear Wood Finish is a durable, non-yellowing, acrylic-based, protective log and wood finish formulated for interior use. This fast drying, low-odor finish beautifies and protects interior wood from common household chemicals, grease, water, scuffing, and abrasion. It also helps prevent fine dust penetration and makes cleaning easier. Available in a beautiful satin finish, this product's unique formula and clarity make it perfect for use over natural wood and woods stained with water-based and oil-based stains.

DEFY Wood Cleaner is a safe, highly effective, oxygenated bleach wood deck cleaning solution that removes dirt, grime, mold, algae, and weathered graying from wood surfaces. Unlike most chlorine bleach based cleaners, this environmentally friendly product is biodegradable and will not harm wood fibers, pets, grass, or most plants.

DEFY Exterior Deck Stain and Sealer Remover is a biodegradable, easy-to-use, deck stain remover that will quickly remove stained wood finishes to restore the natural beauty of wood surfaces. This deck stain and sealer remover will remove most oil- and latex-based finishes including: clear film-forming varnishes, polyurethanes, solid color and semi-transparent stains.

DEFY Wood Brightener is designed to be used after DEFY Wood Cleaner or DEFY Stain Stripper in order to neutralize the surface and restore the natural beauty of exterior wood. In addition to neutralizing the surface of the wood, it excels at removing rust or tannin stains caused by fallen leaves.

MasonrySaver All-Purpose Heavy Duty Water Repellent is the 'work-horse' product of the MasonrySaver line. This high-performance, VOC compliant product is a perfect fit for sealing and protecting brick walls, driveways, sidewalks, and patios.

MasonrySaver Garage Floor Sealer is a non-yellowing, acrylic polymer blend sealer formulated for sealing properly cured concrete surfaces.

Designed for use on both interior and exterior concrete, MasonrySaver Decorative Concrete Sealer is suitable for use on a variety of surfaces where a durable gloss finish is desired, including concrete patios, driveways, sidewalks, and even garage floors.

MasonrySaver® Water Repellent for Split Face Block is a waterborne block sealer that causes water to shed and significantly reduces water penetration into a wall system. It is specifically designed for lightweight, split face, and fluted block.

MasonrySaver® #25 Floor Finish is a highly durable, water-based acrylic polymer interior floor finish that provides a rich, gloss finish that resists dirt and floor scuffing.

MasonrySaver® Water Repellent for Brick is a modified siloxane based product designed to deeply penetrate most masonry and concrete pores. Unlike acrylics, silicones, and other waterproofing sealers that remain on the surface and trap water vapors, this masonry waterproofing product allows deep penetration of its active ingredient of up to 1/4 inch or more.

Masonry Cleaner & Degreaser is a super-concentrated, alkaline-based cleaner formulated to clean a variety of masonry surfaces, including concrete, brick, and stone. It can be used to remove petroleum-based stains such as oils, dirt grime and efflorescence. As this product is not an acid, it is environmentally safe and biodegradable.

MasonrySaver VOC Compliant Solvent Base Water Repellent is meant for use on previously waterproofed surfaces. It is designed to penetrate deeply into most masonry and concrete pores and can be used as a clear sealant for brick and cement patios, concrete driveways, or other masonry surfaces.

MasonrySaver® No-Rinse Concrete Etch is a hydrofluoric acid etching material designed for etching concrete or other masonry surfaces prior to coating or sealing. A thin film of Etch will etch any silica-containing surface in as little as 15 seconds.

MasonrySaver Solvent Base Water Repellent is meant for use on both untreated or previously waterproofed surfaces. Capable of penetrating up to 1/4 of an inch depending on porosity, this product is an effective, penetrating water repellent in a mineral spirits carrier designed to protect above-grade masonry surfaces.

MasonrySaver Extra-Strength Water Sealant is a clear, solvent-based RTV silicone elastomer formulated for concrete block and other marginally porous masonry. This masonry sealant penetrates and fills pores to prevent water penetration through exterior walls exposed to normal weathering with minimal altering of the natural appearance.

MasonrySaver Acrylic Waterproofing Sealer is a clear, water-based, non-yellowing, acrylic brick sealer formulated for use on above-grade, interior brick walls or exterior, non-porous substrates such as brick, stone, smooth masonry, and other moderately dense surfaces.

Epoxy Fortified Paver Sealer is a durable, water-based, clear wet-look concrete sealant designed to protect and beautify both clay brick and cement patio type paver stones to give them a rich, satin finish while functioning as a paver sand sealer.

MasonrySaver Safer Brick & Masonry Cleaner is a safety breakthrough in acid cleaning for commercial and home use. Use for any tough acid cleaning or etching job where you would normally use muriatic acid. The chemical composition of Safer Masonry Cleaner is the same as muriatic acid with proprietary additives. The patented chemistry virtually eliminates the dangerous, toxic fumes and potential acid burns normally associated with muriatic acid.

Designed for chimneys and other vertical masonry surfaces, ChimneyRx Masonry Chimney Water Repellent (formerly branded DEFY) is a modified siloxane based product, specifically designed for chimneys, that penetrates deeply into most masonry and concrete pores.

Make chimney cleaning easy with Chimney RX Professional Grade Creosote Remover. If you burn wood, you may have a hidden fire hazard in your chimney  CREOSOTE! Creosote is a black, tar-like substance caused by the condensation of gases in smoke. In time it builds up and, under the right conditions, can ignite into a dangerous chimney fire.

Stops water leaks and prevents chimney crown cracks. ChimneyRx Brushable Crown Repair is a fast-setting, elastomeric coating that forms a flexible, waterproof membrane. It's specifically formulated to repair and protect chimney crowns from water intrusion.

Have a smoke and soot stained fireplace? ChimneyRx Paint "N" Peel Fireplace Cleaner is your answer.

Chimney RX Hearth & Grill Cleaner is a commercial-strength citrus cleaner that removes smoke and creosote stains. It is a high-alkalinity detergent that effectively cuts through smoke and creosote stains to clean fireplace glass, hearths, stoves, brick, stone, and more. 

Use ChimneyRx Flashing Sealant to repair chimney flashing leaks. ChimneyRx Elastomeric Flashing Sealant is an elastomeric sealant specially formulated to permanently adhere to asphalt shingles, aluminum flashing, brick, and other chimney and roofing materials.

A long lasting, exterior waterproof membrane for chimney crowns, ChimneyRx Trowelable Chimney Crown Repair is an elastomeric coating that forms a flexible, waterproof membrane over the surface of the crown. It is specifically formulated to repair and protect chimney crowns from water intrusion.

ChimneyRx Masonry Crack and Joint Sealant is a brushable, elastomeric sealant used to repair exterior cracks in mortar joints on chimneys, brick walls, and between concrete masonry units. The product seals larger cracks and other defects that cannot be corrected with water repellents alone.

ChimneyRx Safer Brick & Masonry Cleaner is a breakthrough in safe acid cleaning for commercial and home use. Use for any tough acid cleaning or etching job where you would normally use muriatic acid.

Scroll to Top