MasonrySaver Decorative Concrete Sealers

MasonrySaver Decorative Concrete Sealer

  • Print
Product Datasheets

Designed for use on both interior and exterior concrete, MasonrySaver Decorative Concrete Sealer is suitable for use on a variety of surfaces where a durable gloss finish is desired, including concrete patios, driveways, sidewalks, and even garage floors.

Product Uses

MasonrySaver Decorative Concrete Sealer is a non-yellowing, acrylic polymer blend sealer formulated for use on properly cured, stamped concrete surfaces. MasonrySaver Decorative Concrete Sealer dust-proofs concrete with a durable acrylic blend resin. On surfaces that have been previously stained using MasonrySaver No-Rinse Concrete Etch, MasonrySaver® Decorative Concrete Sealer leaves an attractive, non-yellowing, durable gloss finish that protects concrete from damage and color loss due to ultraviolet light, moisture, and abrasion/wear.

Product Benefits

  • Water-Based formula for easy application
  • Provides an attractive, gloss finish to masonry and conrete surfaces
  • Protects masonry and concrete surfaces from color fade
  • Seals concrete surfaces making them washable and easy to maintain
  • Non-yellowing, clear finish
  • Durable concrete protection with "hot tire" resistance
  • Can be applied over previously treated surfaces with solvent-base sealer

 

LIMITATIONS: Not suitable for use over asphalt surfaces. This product is designed for use on horizontal or vertical surfaces. Do not use on below-grade surfaces that are subject to severe hydrostatic pressures. When using in areas subjected to hot-tire traffic, allow adequate time for product to cure before putting the area back into surface. When applying over previous coating, hot-tire resistance maybe compromised. Do not use if the area will be exposed to softer, high performance tires.

 

Maintenance

When MasonrySaver Decorative Concrete Sealer begins to appear worn on the surface, a single coat of material may be applied once surface has been properly prepared. For surfaces that have been waxed, follow the waxing product's label directions for maintaining the waxed surface. Avoid applying maintenance coat more frequently than every 18 – 24 months to avoid excessive build-up of material on surface. When build-up of product does become excessive, surface should be thoroughly stripped of product before reapplication of two coats of material.

 

  • Details
  • Technical Info
Size Approx. Weight Product Code UPC #
1 gal 9 lbs 300180 70905731011
5 gal 45 lbs 300181 70905731059

  • Coverage Rate (all per gal) : 100-150 sq. ft. on concrete
  • Available Sizes: 1 and 5 gallon containers
  • Application Method: Pump-up Sprayer or Airless Sprayer
  • Dry Time: 4-6 for foot traffic, 4days for automobiles. Allow 48 hours before waxing.
  • Cleanup: Soap and Water
  • VOC Content:Less than 50 g/l

Scroll to Top