MasonrySaver Waterproofing Products

MasonrySaver VOC Compliant Solvent Base Water Repellent

  • Print
Product Datasheets

MasonrySaver VOC Compliant Solvent Base Water Repellent is meant for use on previously waterproofed surfaces. It is designed to penetrate deeply into most masonry and concrete pores and can be used as a clear sealant for brick and cement patios, concrete driveways, or other masonry surfaces.

MasonrySaver VOC Compliant Solvent Base Water Repellent is an effective, penetrating water repellent in a mineral spirits carrier designed to protect above-grade masonry surfaces. 

This VOC compliant silane/siloxane product comes with a seven year warranty when applied to vertical surfaces. It can be used to retreat previously waterproofed surfaces as well. On cement patios where a sheen or 'wet look' is desired, use our Paver Sealer.

Long-lasting Water Repellent Protection

Other waterproofing sealers form a film on the surface and trap water vapors; VOC Compliant Solvent Base Water Repellent allows deep penetration of its active ingredient of up to 1/4 inch or more. As a result, the special siloxanes in VOC Compliant Solvent Base Water Repellent react to form strong chemical bonds beneath a treated surface. These bonds allow the product to become a physical part of the structure and provide long-lasting water repellent protection without altering the surface appearance.

Note: This is a VOC compliant product. The VOC content is less than 400 grams per liter and it can be sold in states that have adopted the California OTC standards. Due to these new VOC regulations, the sale of our regular MasonrySaver Solvent Base has been prohibited. So far, the states that have adopted these new standards include California, Connecticut, Delaware, Illinois, Washington D.C., Maine, Massachusetts, New Hampshire, New Jersey, New York, Ohio, Pennsylvania, Rhode Island, Vermont, and Virginia (only in the counties of Arlington, Fairfax, Prince William, Stafford, and Loudon).
If you reside in one of these areas, you will need to use this VOC Compliant Solvent Base product. It works the same as the regular MasonrySaver Solvent Base with the following exceptions: it dries faster, it's only available in one-gallon containers and it has a slightly different smell. Aside from the above three differences, VOC Compliant Solvent Base Water Repellent is applied in the same manner and has the same lifespan.

100% Breathable Protection

Moisture, from either internal or external sources, is usually present in masonry and concrete. Film-forming sealers and silicone coatings form a water-resistant surface that traps water vapors inside. If these vapors cannot escape, they will contribute to spalling, scaling, deterioration, and freeze-thaw damage. VOC Compliant Solvent Base Water Repellent is 100% vapor permeable, a non film-forming water repellent that penetrates and lines masonry and concrete pores.

Ideal for previously treated surfaces

With its mineral spirits base, VOC Compliant Solvent Base Water Repellent is an ideal maintenance product for previously treated surfaces as the mineral spirits carrier will allow the product to bond with surfaces that have previously been waterproofed. It can also be applied over siliconized acrylic concrete stains.

Masonry Waterproofing Applications

VOC Compliant Solvent Base Water Repellent is an extremely versatile product that can be used on most vertical or horizontal, exterior, above-grade masonry surfaces including:

  • Adobe
  • Architectural Concrete - precast or cast in place
  • Clay brick
  • Mortars
  • Natural Stone
  • Limestone
  • Granite
  • Sandstone
  • Terra Cotta
  • Exposed Aggregate Products
  • Portland Cement Stuccos
  • Concrete Driveways
  • Sidewalks
  • Patios

(New masonry should be cured for a period of no less than 14 days.)

  • Details
  • Technical Info
Size Approx. Weight Product Code UPC #
1 gal 11 lbs 300120 70905722012

  • Coverage Rate (all per gal) : 100-150 sq. ft.
  • Available Sizes: 1 gallon container
  • Application Temperatures: Min. 40-100° F
  • Application Method: Pump-up Sprayer or Airless Sprayer
  • Dry Time: 2-6 hours depending on temperature and humidity
  • Cleanup: Mineral Spirits

Scroll to Top