ChimneyRx Masonry Crack and Joint Sealant seals cracks up to 1/8" wide on brick faces and at mortar and brick joint interfaces to provide waterproof protection to minimize brick mortar repair. It dries clear to milky white depending on the size of the crack. It prevents water infiltration and subsequent damage, yet allows water vapors to escape.
The High Cost of Tuck Pointing
When applied to a properly prepared wall or chimney surface, ChimneyRx Crack & Joint Sealant can solve tough leak problems without the expense of tuck pointing or surface grouting. It will not significantly change the appearance of most walls, chimneys or masonry surfaces. A slight gloss will occur on dense surfaces which will lessen over time.
Note: Material left on the brick's surface can whiten over time, creating an unsightly appearance.
Use ChimneyRx Masonry Crack and Joint Sealant along with ChimneyRx Masonry Chimney Water Repellent to provide maximum protection. A one pint container will treat the mortar joints surrounding approximately 110 standard bricks, or approximately 25 square feet of wall surface.
- Technical Info
|Size||Approx. Weight||Product Code||UPC #|
|1 pint||2 lbs||30400||709057700160|
|1/2 gal||6 lbs||30019||709057700641|
- Coverage Rate : 1/2 gallon container will treat the mortor joints surrounding approx. 550 standard bricks, or 100 sq. ft. of wall surface
- Available Sizes: 1 pint or 1/2 gallon recycleable containers
- Application Temperatures: Between 40-100 ° F
- Application Method: Brush
- Dry Time: 2 hours
- Cleanup: Soap and water