MasonrySaver® Water Repellent for Brick is a modified siloxane based product designed to penetrate deeply in to most masonry and concrete pores. Unlike acrylics, silicones, and other waterproofing sealers that remain on the surface and trap water vapors, this masonry waterproofing product allows deep penetration of its active ingredient of up to 1/4 inch or more.
As a result, the special siloxanes in MasonrySaver® Water Repellent for Brick react to form strong chemical bonds beneath a treated surface. These bonds allow the product to become a physical part of the structure and provide long-lasting water repellent protection without altering the appearance of the brick. Moisture, from either internal or external sources, is usually present in brick, masonry, and concrete.
Reduces Costly Repairs
MasonrySaver® Water Repellent for Brick is 100% vapor permeable, which allows the water vapors to escape. This reduces costly chimney repair such as spalling, scaling, deterioration, and freeze-thaw damage that results from trapped moisture when clear coatings and water sealers are used for waterproofing brick.
Water Repellent for Brick is sold in 1 and 5 gallon containers. Each gallon covers between 90-150 square feet. If surface has been previously treated with a waterproofer, use MasonrySaver® Solvent Base Water Repellent.
|30 gal drum
|55 gal drum
- Coverage Rate (all per gal) :
- Brick: 95-150 sq.ft.
- Block: 50-75 sq. ft.
- Concrete: 75-150 sq.ft.
- Stucco: 75-150 sq. ft.
- Adobe: 75-150 sq.ft.
- Limestone: 75-150 sq.ft.
- Available Sizes: 1, and 5 gallon recycleable containers
- Application Temperatures: Min. 40° F
- Application Method: Pump-up Sprayer or Airless Sprayer
- Dry Time: 1-2 hours (Allow 6 hours before rainfall)
- Cleanup: Soap and water