Ultra violet rays cause wood to turn gray and become susceptible to water penetration and decay. DEFY Extreme Wood Stain effectively protects the wood from the harmful effects of the sun and protects wood from graying using state of the art nano-technology.
Extreme Wood Stain contains zinc oxide particles that reflect the damaging Ultraviolet Rays from the sun. When you reduce the size of these zinc particles down to the nano level, they become invisible to the naked eye. These nano-particles are distributed at a rate of over 30 trillion per square inch of surface area to provide protection from the sun in much the same way as they do when used in sun blockers and sunscreen lotions.
Not only will this help with prolonging the graying, but the nano-particles are highly resistant to mold and mildew, enabling you to retain the natural color.
This VOC compliant semi-transparent stain provides the maximum UV protection available, adding a semi-transparent tint to your wood. Extreme Wood Stain is available in six colors: Natural Pine, Cedartone, Light Walnut, Butternut, Redwood, and Driftwood Gray. It also comes in a clear finish.
DEFY Extreme Wood Stain Uses
DEFY Extreme Wood Stain is designed to be used on interior or exterior wood surfaces including:
- wood siding
- log homes
- shake shingles
- outdoor wood furniture
- pressure treated lumber
- all other natural wood surfaces.
Application of Extreme Wood Stain is EASY! A treatment of DEFY Wood Cleaner will generally clean and restore previously treated surfaces to their original appearance. Once cleaned, a quick application of DEFY Wood Brightener will brighten the wood and restore the wood's natural beauty. This deck sealer will provide long-term beauty and protect the natural appearance of your wood. The surface should be recoated annually or when graying initially starts to appear.
To ensure your satisfaction with this product, it is highly recommended that you use both DEFY Wood Cleaner and DEFY Wood Brightener, per label instructions, to prepare any weathered wood for staining. Use of alternative products or methods, prior to sealing, may result in unsatisfactory final results.
DEFY Extreme Wood Stain dries to a flat, semi-transparent finish that allows the natural wood grain to show through. It is sold in 1 and 5 gallon containers and covers 100-150 square feet per gallon depending on wood texture and porosity.
For Easy Fast Application use a car wash brush available at most home improvment stores.
Easy Deck Care Maintenance
Periodically, as the surface begins to get dirty or dull, simply wash it down with a mild detergent and water. As the weather begins to wear away at the surface, a maintenance coat will need to be applied. To check the surface to see if it's ready for a maintenance coat, simply sprinkle a little water on it. If the water is immediately absorbed into the wood, then it is ready to be recoated.
The first step in the maintenance process is to apply a coat of Wood Brightener. This will lighten any minor graying and clean the surface. Allow the surface to dry 24 hours followed by a single coat application of Extreme Wood Stain as directed on the label.
All of the DEFY wood stains meet the Green Performance Standards of the Master Painters Institute (MPI) which takes into account performance and environmental friendliness in light of the latest environmental regulations. Click here for the Green Approved Product List.
- Technical Info
|Size/Color||Approx. Weight||Product Code||UPC #|
|1 gal/Crystal Clear||9 lbs||300164||709057560016|
|5 gal/Crystal Clear||45 lbs||300165||709057560054|
|1 gal/Cedar Tone||9 lbs||300158||709057561013|
|5 gal/Cedar Tone||45 lbs||300159||709057561051|
|1 gal/Light Walnut||9 lbs||300160||709057562010|
|5 gal/Light Walnut||45 lbs||300161||709057562058|
|1 gal/Natural Pine||9 lbs||300162||709057563017|
|5 gal/Natural Pine||45 lbs||300163||709057563055|
|1 gal/Redwood||9 lbs||300419||709057565011|
|5 gal/Redwood||45 lbs||300420||709057565059|
|1 gal/Driftwood Gray||9 lbs||300409||709057565014|
|5 gal/Driftwood Gray||45 lbs||300410||709057564052|
|1 gal/Butternut||9 lbs||300425||709057566018|
|5 gal/Butternut||45 lbs||300426||709057566056|
- Coverage Rate: 100-150 sq. ft. per gallon (figure 100 sq. ft. for 2 coats)
- Available Sizes: 1, and 5 gallon recycleable containers
- Application Temperatures: Min. 45° F
- Application Method: Pump-up Sprayer, Airless Sprayer, Pad Applicator, or Brush
- Dry Time: 2-4 hours (above 45° F), Allow 24 hours before using
- Cleanup: Soap and water